Switching the device on and off
1. To switch the device on, press and hold the power key.
2. If the device asks for a PIN or security code, enter the code, and press
OK
.
3. To switch the device off, press and hold the power key.
Tip: The device does not power off completely unless the battery is removed. Closing the device cover initiates a power
saving mode.
Tip: When you switch the phone on, it may recognize the SIM card provider and configure the correct text message,
multimedia message, and GPRS settings automatically. If not, contact your service provider for the correct settings.
The communicator interface starts up first after the battery is inserted. You cannot switch on the cover phone immediately after
the battery has been inserted, you must wait until the communicator interface has started.
Tip: If you have inserted the battery, but the device does not start up, press the power key.
The communicator interface can be used without the phone functions when a SIM card is not inserted or when the
Offline
profile
is selected.